Sports Parts List & Prices Evo X
*Prices indicated include GST and may change without notification
*Any parts purchase with a Credit Card will incure a 3% surcharge
*Motorsport Engineering and Management accept no liability for any failure of any part that may occur whether fitted by Motorsport Engineering & Management or the consumer
*No Labour charges are included and will be quoted on upon request
| 1. ENGINE | |
| Exhaust Extension Tail Pipe when Rear Muffler is not used. (Suit Show Room Class) |
$660.00 |
| TMR 3" Twin outlet S/Steel Cat Back exhaust system | $1,383.00 |
| TMR 3" Twin outlet S/Steel Turbo Back exhaust system |
$2,043.00 |
| TMR 247kW Upgrade Package including TMR Hi-flow rear Muffler |
$3,380.00 |
| TMR 270kW Upgrade Package including TMR Hi-flow rear Muffler |
$3,630.00 |
| TMR 300kW Upgrade Package including 3" Twin outlet S/Steel Turbo Back exhaust system. |
$4,818.00 |
| Competition Clutch Disc (Tarmac) - 8 Paddle |
$375.00 |
| Competition P/Plate | $858.99 |
| Competition Engine/Transmission Mount Bushing Kit | $345.04 |
| Intercooler Aluminum Pipe Set (Ralliart) Pressure Side | $1,917.35 |
| Intercooler Aluminum Pipes (Ralliart) Air Suction Side | $1,154.50 |
| Long Reach Competition Spark Plug | $421.96 |
| Competition Thermostat | $153.39 |
| High Pressure Ralliart Radiator Cap | $74.50 |
| Competition Aluminium Radiator 55mm core | $995.00 |
| EVO X Chrome Moly Flywheel | $561.00 |
| 2. SUSPENSION | |
| (Ohlins) Tarmac or Track Spec, Coil Over Springs with Cannister/Adj Bump/Reb | $16,000.00 |
| MCA Coil Over EVO X suspension suit Showroom Class |
$7759.40 |
| MCA Coil Over, cannister, bump and rebound adj, Tarmac rally and race | TBA |
| TMR Lowered uprated spring Kit - Road and Minor Track use |
$679.80 |
| TMR Lowered uprated spring Kit - Full competition use |
$679.80 |
| Koni Show Room spec, Adj Bump/Reb, non adjustable spring platforms, uprated lowered Springs. |
$4,400.00 |
| Competition Suspension Bush Kit (Front) | $923.75 |
| Competition Suspension Bush Kit (Rear) | $1,427.44 |
| Enkie Wheel (Same as supplied with car) | $800.00 |
| Spare Wheel Kit |
$800.00 |
| 26 Rear Anti Roll Bar | $360.00 |
| 27mm Rear Anti Roll Bar | $360.00 |
| 27mm Front Anti Roll Bar | $376.50 |
| 3. BRAKES | |
| Competition Pads Front (Suit Standard Brembo Package) Price may vary with application. | TBA |
| Competition Pads Rear (Suit Standard Brembo Package) Price may vary with application. | TBA |
| Full Floating Brembo Disc Assembly Front (Tarmac Rally & Road) x 2 | TBA |
| Rear Braided Brake Lines to suit standard Caliper |
$262.00 |
| Front Braided Brake Lines to suit Ohlins/MCA Suspension and standard Caliper |
$232.98 |
| Aeroquipe Brake Lines, Body to Caliper, Front & Rear | $465.00 |
| Front Brake Discs (Non Grooved) Replacement for Standard disc x 2 |
$852.06 |
| Front Brake Discs (Floating non grooved) Replacement for Standard disc x 2 | $1,905.86 |
| Front Brake Cooling Scoops | $297.00 |
| 4. BODY | |
| Roll Cage, Bolt in and CAMS approved | $4,400.00 |
| FIA Approved Roll Cage, Chrome Moly Weld In (add $440 to be painted Black) | $9,350.00 |
| Roll Bar Padding |
$88.00 |
| Remove and refit windscreen to install weld in roll cage |
$330.00 |
| Velo Seat, FIA Approved Carbon Fibre Standard Size (each) | $3498.00 |
| Velo Seat FIA Approved Carbon Fibre Large (each) | $3797.99 |
| Velo Seat FIA Approved Fibre Glass Standard Size (each) | $1,295.00 |
| Velo Seat FIA Approved Fibre Glass Extra Large (each) | TBA |
| Std Seat Mount position frame kit to mount competition seats, suits all Roll Cages |
$297.00 |
| Std Co-Driver Seat Mount position frame kit to mount competition seats. Suit TMR Weld in Cage | $407.00 |
| Std Co-Driver Seat Mount position frame kit to mount competition seats. Suit TMR Bolt in and Kit Roll Cage | $297.00 |
| Seat Runner (per seat) | $182.60 |
| Seat Mounting Brackets (per seat) | $209.00 |
| Seat Belts FIA Approved x 2, (6 point, 3" Width) $550.00 Each. | $1,100.00 |
| 6 Point Harness to suit hans device |
$839.85 |
| Fire Extinguisher 1kg x 2 required (with twin retaining clips) | $200.00 |
| Safety Triangle & Mounts | TBA |
| First Aid Kit with Seat Belt Cutter | $175.00 |
| Driver Foot Plate with Footrest (Aluminum) | $499.00 |
| Driver Foot Plate without Footrest (Aluminum) | $324.50 |
| Co-Driver Foot Plate/rest (Aluminum) | $348.05 |
| Spare Wheel Retaining Bolt Assembly |
$37.58 |
| Ralliart Gear Knob Black or White | $97.08 |
| Tow Hook Strap, Front & Rear (Red) | $60.50 |
| Bonnet Pins Flush Mounting | $172.99 |
| Air Bag & Seat Belt Resistor Kit |
$302.50 |
| Sabelt 350mm x 90mm dish Steering Wheel |
$450.00 |
| Sabelt 350mm x 65mm dish Steering Wheel | $450.00 |
| 5. DRIVELINE | |
| Diff Front Ralliart LSD Super Traction (Gravel & Tarmac Spec) | $3,378.26 |
| Transfer Case Service Kit with Bearings & Spacers (Required when fitting Front LSD) | $954.06 |
| Competition Bush Kit for Diff support & Rear crossmember. | $206.59 |
| 6. ELECTRICAL | |
| Battery Master Switch (Manual Cable Type) | $825.85 |
| Ralliart Centre Diff Controller |
$1,280.95 |
| Competition Battery |
$418.00 |
| Competition Battery Tray with Hold Down Clamp |
$297.00 |
| 7. FUEL SYSTEM | |
| Fuel Sample Fitting with Quick Release Coupling | $430.00 |
